5602 NPTF Pipe Run Tee

The 5602 NPTF Pipe Run Tee provides a practical three-way connection for hydraulic and fluid-transfer systems. Its tee configuration allows a hydraulic line to continue through the main run while providing an additional branch connection for connected components.

Gear House Hydraulics lists the 5602 for lubrication, instrumentation, and most high-pressure hydraulic systems, with working pressures up to 5,000 PSI, depending on tube and fitting size.

Three-Way Run Tee Design

The 5602 features a T-shaped design that creates a branch point within a hydraulic circuit while maintaining a direct run through the fitting.

This configuration can help organize hydraulic lines around pumps, valves, manifolds, cylinders, instrumentation equipment, and other system components where an additional connection is required.

NPTF Threaded Connection

The 5602 is identified as an NPTF Pipe Run Tee. NPTF, or National Pipe Taper Fuel, is a tapered pipe-thread standard used in hydraulic and fluid-transfer applications.

When selecting the 5602, verify the thread specification and nominal connection size required by the hydraulic assembly. Compatible mating components should be confirmed before installation.

Steel Construction

The 5602 is listed with steel construction, providing a durable fitting body for hydraulic and fluid-transfer connections.

Its steel construction makes the fitting suitable for assemblies where a strong and dependable threaded connection is required.

Up to 5,000 PSI Working Pressure

The 5602 collection lists working pressures up to 5,000 PSI. The actual working pressure can vary depending on the tube and fitting size.

For high-pressure hydraulic applications, confirm that the selected fitting configuration and the complete assembly are suitable for the actual operating pressure, temperature, fluid, and service conditions.

Available Configurations

The 5602 collection currently shows configurations from 1/8 × 1/8 × 1/8 through 1-1/2 × 1-1/2 × 1-1/2. Available product configurations include 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, and 1-1/2 inch sizes.

Choose the configuration that matches the required connections in your hydraulic system.

Reliable Hydraulic Line Branching

A run tee provides a convenient way to introduce an additional connection into an existing hydraulic line. Instead of creating a branch using several separate fittings, the 5602 combines the run and branch connection into one compact fitting.

This can help create a cleaner and more organized hydraulic layout while maintaining straightforward threaded connections.

Built for Demanding Fluid Systems

The 5602 is listed for lubrication, instrumentation, and most high-pressure hydraulic systems.

Its three-way configuration can be useful in hydraulic circuits and fluid-transfer assemblies where a continuous run and an additional branch connection are required.

Compact Hydraulic Connection

The compact tee design of the 5602 helps connect multiple hydraulic lines within a single fitting. This can be useful where components are positioned close together and a practical branch connection is needed.

The fitting can help simplify routing around hydraulic equipment while maintaining a direct connection between the main run and branch line.

Installation Considerations

Before installing the 5602:

• Confirm the required NPTF thread specification.
• Verify the correct connection size.
• Inspect and clean the threads before assembly.
• Use the appropriate thread-sealing method for the hydraulic system.
• Position the tee correctly before final tightening.
• Avoid excessive tightening that could damage threads or connected components.
• Confirm the selected fitting is suitable for the system pressure and service conditions.
• Check the complete assembly before placing the hydraulic system into operation.

Proper fitting selection and installation help maintain a reliable hydraulic connection.

Why Choose the 5602?

The 5602 NPTF Pipe Run Tee provides a practical three-way connection for hydraulic and fluid-transfer assemblies.

Key features include:

• NPTF pipe run tee configuration
• Three-way connection design
• Steel construction
• Working pressure up to 5,000 PSI
• Multiple connection configurations
• Compact hydraulic line branching
• Suitable for lubrication and instrumentation systems
• Suitable for most high-pressure hydraulic systems

Select the Correct 5602 Configuration

Selecting the correct 5602 starts with identifying the required connection size and thread specification for your hydraulic assembly.

The collection currently includes configurations ranging from 1/8 × 1/8 × 1/8 to 1-1/2 × 1-1/2 × 1-1/2. Confirm the required size and pressure requirements before ordering.

For high-pressure applications, also verify that the selected configuration is appropriate for the complete system's operating conditions.

Gear House Hydraulics 5602 NPTF Pipe Run Tee

Gear House Hydraulics supplies the 5602 NPTF Pipe Run Tee for hydraulic, lubrication, instrumentation, and fluid-transfer connection requirements.

Its three-way run tee design provides a straightforward way to add a branch connection while maintaining a continuous hydraulic line through the fitting.

Choose the appropriate configuration for your assembly and verify the thread, pressure, and service requirements before installation.

FAQs

What is a 5602 NPTF Pipe Run Tee?

The 5602 is an NPTF Pipe Run Tee designed to create a three-way connection within hydraulic and fluid-transfer systems.

What material is the 5602 made from?

The 5602 is listed with steel construction.

What is the working pressure of the 5602?

The collection lists working pressures up to 5,000 PSI, with the actual working pressure varying depending on tube and fitting size.

What sizes are available for the 5602?

The collection currently shows configurations from 1/8 × 1/8 × 1/8 through 1-1/2 × 1-1/2 × 1-1/2.

Where can the 5602 be used?

The 5602 is listed for lubrication, instrumentation, and most high-pressure hydraulic systems.

What is a pipe run tee used for?

A pipe run tee provides a three-way connection where a main hydraulic line continues through the fitting while an additional branch connection is created.

Is the 5602 suitable for high-pressure hydraulic systems?

The Gear House Hydraulics page lists the 5602 for most high-pressure hydraulic systems and shows working pressures up to 5,000 PSI. The appropriate pressure rating should be confirmed for the selected fitting size and application.

How do I choose the correct 5602?

Confirm the required NPTF thread specification and connection size, then verify that the selected configuration meets the pressure and service requirements of your hydraulic system.