NL1015: Yellow Generic Air Hose – 400 PSI

NL1015 is used in similar applications as our NL1019, however it has been formulated differently to provide a lower price-point option for applications where handling characteristics and resistance to the elements are less of a factor. Its blended cover is resistant to standard abrasion, weathering, and gouging and its blended tube is resistant to heat and moderate oil mist (RMA Class C petroleum based mist, do not use this hose with vegetable oil or mineral oil). Popular assemblies are listed below.

Construction: Tube: Black SBR/NBR rubber blend. Cover: Wrapped, yellow SBR/EPDM rubber blend. Reinforcement: Synthetic yarn.

Typical Fittings: Universals, Ground Joints, Double Lock/Twist Lock Quick Acting, N176 Hex Hose Nipples, N315/320 Long Shanks (water only), GJS/IMS series machined ground joint stems (must be coupled with WIL series extra-long interlocking crimp ferrules), punch clamps/crimp sleeves on small ID sizes (up to 1″), interlocking bolt clamps (crimp sleeves are not recommended on large bore heavy duty air hose applications such as 1-1/4″ to 4″ due to the tough cover and wall thickness – use interlocking bolt clamps). Note: 1-1/4″-2″ 4-lug Universals should only be used in non-critical fluid transfer applications, they are NOT be used in critical applications or heavy duty air, it is a relatively poor and unsafe design for proper coupling integrity. Whipcheck Safety Cables or hose halters are mandatory on heavy duty air hoses for safety reasons. Interlocking bolt clamps MUST be checked and re-tightened before EACH use due to the cold flow/setting characteristics of rubber hose!

 

Catalog Page 12   Air Hose Pressure and Flow Chart  Tool Air Supply Requirements

Reviews

There are no reviews yet.

Be the first to review “NL1015: Yellow Generic Air Hose – 400 PSI”

Your email address will not be published. Required fields are marked *