NL2515: Generic Brand Red EPDM Steam 250/406F Hose

NL2515 is a cost effective rubber steam hose for use in competitive applications where our standard brand name steam hoses are not required. As with other steam hoses, this hose is designed for steam thawing, heat control, and blowout service in refineries, shipyards, plants, and mills up to 410°F. Its smooth cover with cloth impression is resistant to heat, abrasion, ozone and weathering (limited oil resistance) while its tube provides good resistance to heat aging (limited resistance to hydrocarbons or oils). For short jumper steam assemblies under 10ft, consider using stainless steel assemblies.

Construction: Tube: Black EPDM rubber. Cover: Red synthetic rubber (wrapped finish; pin pricked to prevent blistering). Reinforcement: Two high tensile wire braids.

Typical Fittings: Interlocking bolt type coupling (ground joints) or crimped ends recommended by the manufactuer (not designed for NL2562). Note: Interlocking bolt clamps MUST be checked and retightened before EACH use due to the cold flow/setting characteristics of rubber hose! DO NOT use universals, camlocks, any gasket type fittings, punch clamps, pinch clamps, crimp sleeves or gear clamps with steam hose. We DO NOT recommend the use of “Imported” Ground Joint Couplings and clamps for Steam, Critical, Toxic, combustible fluids, or in cyclic conditions involving temperature or pressure. “Imported” Ground Joint Couplings and Clamps often do not meet stringent material or tolerance guidelines for critical applications. We ONLY RECOMMEND Dixon Boss or Campbell Viton Seal Ground Joint Couplings and Clamps for use with steam or critical applications – see safety warning information. Testing & certification.

Temperature Range: -40°C (-40°F) to +207.7°C (406°F)

Warning: Critical Application-Follow Coupling/Maintenance Procedures

Cut Method: Bench Mount Electric Saw // Wear Ear & Eye Protection

Hose Size: ½”-3”