NL8209: Concrete Pumping Textile Reinforced 1230 PSI

NL8209 is compounded and constructed differently for a competitively priced alternative to higher pressure, premium brand name concrete hoses on the market and provides an option for less frequent or lower pressure pump applications (<1230psi) where added durability is not the defining factor. It is used to conduct wet cement, plaster, grout, wet shotcrete, and concrete to building structures, swimming pools, or construction sites; for more aggressive, continuous, higher pressure use then refer to our premium NL8210 Allcrete. Service life of material handling hoses may vary depending on the operating conditions, hours of use, and the product being conveyed. Always rotate the hose regularly for even wear and inspect the tube for degradation before use. *SPECIAL NOTE: Concrete hose is typically not repaired as the wall/tube will wear down and therefore the coupling integrity is significantly compromised if re-installing an end.

Construction: Tube: Smooth, black SBR rubber. Cover: Wrapped, smooth, black SBR rubber. Reinforcement: Multiple spiral plies of high strength fabric.

Typical Fittings: WFT-CS Heat treated swaged ends (HD California flanged ends for concrete pump hose, DO NOT use Grooved or NPT ends for concrete pump service). N95 Galvanized Internal Expansion (1″-1-1/2″). Whipcheck Safety Cables & Nylon Slings (must be properly installed in an extended position). *SPECIAL NOTE: Concrete hose is typically not repaired as the wall/tube will wear down and therefore the coupling integrity is significantly compromised if re-installing an end.

Temperature Range: -40°C (-40°F) to +80°C (176°F)

Detail Comments: Working pressures shown based on this hose being used to transfer concrete, not for water or other fluids. For non-concrete applications the working pressure will vary depending on the safety factor required (as an example for water, certain sizes could be rated to 500-600 psi). *SPECIAL NOTE: Concrete hose is typically not repaired as the wall/tube will wear down and therefore the coupling integrity is significantly compromised if re-installing an end.

Warning: Critical Application-Follow Coupling/Maintenance Procedures

Cut Method: Hacksaw

Hose Size: 2”-5”